This Mysore Bonda recipe (also known as Mysore Bajji) is a popular South Indian snack food made with lentils, chopped fresh coconut, fresh herbs and vibrant spices. The ingredients are combined to create a thick batter, and are then deep fried to make crisp, soft and fluffy fritters. Make our favorite mysore bonda recipe with step-by-step instructions and photos – plus my foolproof recipe to make delicious coconut chutney for dipping!
About Mysore Bonda
Mysore bonda is a yummy snack often found in many South Indian states. It is also called as Mysore Bajji. They are round fried fritters that are crispy on the outside and soft on the inside, and brimming with flavorful seasonings.
These fluffy, crunchy, utterly addictive snacks are commonly served with coconut chutney – but are also tasty enough to enjoy on their own or with any other chutney!
There are many different versions of mysore bonda recipes, each reflecting their unique region of origin. Most commonly you find a variation made with all-purpose flour, yogurt, and spices. These bonda are popular in Andhra Pradesh, Telangana and Karnataka. You can check this version of Goli Baje which is similarly made.
My preferred type of bonda recipe comes from the Tamil Nadu state and is made with lentils (urad dal, or husked black gram) plus spices and fresh aromatics. The batter is similar to Medu Vada (black gram fritters). However, medu vada are donut-shaped snacks whereas mysore bonda is more round and pillow-like in shape.
Keep reading for my easy homemade mysore bajji and coconut chutney recipes! The flavorful chutney pairs amazingly well with crispy fried bonda.
These bonda and chutney recipes are great to make for a casual weekend breakfast or tasty evening snack!
How to make Mysore Bonda Recipe
Making Bonda Batter
For the best texture I find it is important to soak the urad dal overnight, so that it becomes soft. Although you want to take care to have as little water as possible in the lentils when making the batter, so the fritters get perfectly crispy without absorbing too much oil
1. Soak ½ a cup urad dal (husked black gram) in water for 5 to 6 hours, or overnight. You can use whole or split urad dal without their husks.
2. Next, drain off all the water and transfer the lentils to a blender or grinder jar.
3. Add 4 to 5 tablespoons water and grind to a smooth, fluffy and thick batter. Scrape the sides down with a spatula while blending to get every piece of lentil ground.
Add water in parts while grinding. So first add 3 tablespoons water and later add water as needed to make a thick flowing batter.
4. With a silicon spatula or spoon, transfer the batter to a large mixing bowl. Add 1 to 1.5 tablespoons of rice flour.
Including rice flour is optional. You can also opt to add fine rava (semolina or suji) instead of rice flour. Both rice flour and rava helps in making the bonda crisp.
TIP: If you have added more water and the batter has a medium consistency, then to thicken it, you can add a total of 1 to 2 tablespoons of rice flour or fine rava.
5. Add ½ teaspoon crushed black pepper, ½ inch freshly grated ginger (½ teaspoon finely chopped ginger), 1 chopped green chilies (½ to 1 teaspoon), 8 to 10 chopped curry leaves, a pinch of asafoetida (hing) and salt as required.
If including coconut, also add 2.5 to 3 tablespoons of chopped fresh coconut.
Note: For a gluten-free version, feel free to omit the asafetida or use gluten-free asafetida.
6. Mix very well.
7. Now briskly whisk the batter with a spoon for 2 to 3 minutes. This adds air to the batter and helps to make the bonda soft and fluffy in texture.
Frying Mysore Bonda
8. Heat oil for deep frying in a kadai or a deep pan. Keep the heat to medium. As a test, drop a pinch of batter in the oil – if it comes up to the surface in a steady motion, then the oil is hot. If it comes up very quickly, the oil is too hot and will fry the bondas too quickly. In case the batter stays inside the oil at the bottom of the pan, the oil is likely not hot enough for frying.
Use a 1 tablespoon measuring spoon to drop the batter by the spoonful into the hot oil.
Note: Don’t overcrowd them!
9. Fry on one side until golden. Then use a spoon to turn, and continue frying.
10. Continue to gently turn and fry the mysore bonda until all sides are golden and crisp.
11. Use a slotted spoon or skimmer to remove the bonda from the pan. Set them on paper towels to remove excess oil.
12. Serve immediately while hot or warm with coconut chutney or any chutney of your choice. These also taste good with tomato ketchup.
They are best enjoyed hot, and typically served with coconut chutney and a cup of strong coffee. You can also serve them with other chutney varieties like onion chutney, peanut chutney, ginger chutney, tomato chutney, coriander chutney, mint chutney or any green chutney.
You likely didn’t drain off enough water before grinding the soaked urad dal. Be sure to thoroughly drain next time.
If you noticed the batter was too runny before frying, sprinkle in a bit more rice flour into the batter and gently mix again. Continue doing this until the consistency is just right, but take care not to add more rice flour than needed. As this will make it dense and less soft.
For the best blend of ingredients to make a tasty fritter with all-purpose flour, I recommend you check out this easy recipe for Goli baje!
Yes, you can easily double the ingredients to make twice as many of the bondas.
I suggest that they are eaten hot or warm as they are made for best taste and texture. However you can store them in an air-tight container for a few hours and consume them on the same day.
If you made this recipe, please be sure to rate it in the recipe card below. Sign Up for my email newsletter or you can follow me on Instagram, Facebook, Youtube, Pinterest or Twitter for more vegetarian inspirations.
Mysore bonda also known as Mysore Bajji is a popular South Indian snack made with lentils, fresh herbs and vibrant spices. The ingredients are combined to create a thick batter, and are then deep fried to make crisp, soft and fluffy fritters.
Prep Time 8 hrs
Cook Time 30 mins
Total Time 8 hrs 30 mins
Servings 14 Mysore Bonda
For soaking lentils
For bonda batter
For coconut chutney
Soaking Lentils and Making Batter
First rinse the urad dal a couple of times in water. Then in a bowl soak the lentils in water for 5 to 6 hours or overnight.
Later drain all the water. In a mixer-grinder or blender add the lentils and water in parts. Grind or blend to a smooth and fluffy batter. First add 3 tablespoons water and then add more as required.
Using a silicon spatula take all of the batter in a bowl.
Whisk the batter briskly for a 2 to 3 minutes with a wired whisk or spoon. This helps in aerating the batter which makes the bonda fluffy and light.
Mix very well with rice flour, crushed black pepper, cumin seeds, chopped ginger and green chillies, asafoetida, chopped curry leaves, chopped coconut (optional) and salt as required.
Frying Mysore Bonda
Heat oil for deep frying in a kadai or fryer. Let the oil heat to a moderately hot temperature.
Using a tablespoon measure or any small to medium-sized spoon, pour the batter in a round shape into the hot oil.
When one side is lightly crisp and slightly golden, then turn over each bonda.
Continue to fry the second side until light golden and crisp.
Fry in medium hot oil till the bonda are crisp and golden turning them over as needed.
Remove with a slotted spoon and place them on kitchen paper towels to absorb excess oil.
Fry the remaining batches of bonda in a similar way.
Serve mysore bonda hot or warm with coconut chutney.
Making coconut chutney
In a small pa, first fry the curry leaves in 1 or 2 teaspoons oil till they get crisp.
Grind or blend all the ingredients mentioned under the coconut chutney list, together with the fried curry leaves and oil, with water.
Serve the coconut chutney with the mysore bonda.
- Use urad dal that is fresh and not aged or old. Aged urad dal will take a lot of time while grinding or blending the batter and the bonda won’t be nicely soft and fluffy.
- Do not make the batter thin. The batter has to be thick but flowing. Thin batter makes for flat bonda and soak up a lot of oil.
- Rice flour is optional and can be omitted. In case if the batter has a medium consistency, then add rice flour or finer rava (semolina or suji) to thicken it.
- The spices, herbs and seasonings can be omitted or reduced according to your taste preferences.
- This bonda recipe is made without onions. But you can add about ¼ cup chopped onions to the batter.
- While frying, ensure that the oil is medium hot. Oil which is warm or not hot enough will make the bonda absorb a lot of oil. Oil which has become very hot, will make the mysore bonda quickly browned from outside with undercooked center.
- Both the recipes of bonda and coconut chutney can be scaled to make a big batch for get togethers or parties.
- Note that the approximate nutrition info is for 1 mysore bonda.
Mysore Bonda Recipe
Amount Per Serving (1 mysore bonda)
Calories 63 Calories from Fat 27
% Daily Value*
Saturated Fat 1g6%
Polyunsaturated Fat 1g
Monounsaturated Fat 2g
Vitamin A 45IU1%
Vitamin B1 (Thiamine) 1mg67%
Vitamin B2 (Riboflavin) 1mg59%
Vitamin B3 (Niacin) 13mg65%
Vitamin B6 1mg50%
Vitamin C 25mg30%
Vitamin E 1mg7%
Vitamin K 1µg1%
Vitamin B9 (Folate) 135µg34%
* Percent Daily Values are based on a 2000 calorie diet.
Like our videos? Then do follow and subscribe to us on youtube to get the latest Recipe Video updates.
All our content & photos are copyright protected. Please do not copy. As a blogger, if you you want to adapt this recipe or make a youtube video, then please write the recipe in your own words and give a clickable link back to the recipe on this url.
This Mysore Bonda Recipe post from the blog archives first published in July 2013 has been republished and updated on 7 August 2021.